Yamaha RS7000 Owner's Manual - Page 107

10. Arpeggio & Assignable Knob Settings (Setup) 10. Arpeggio & Assignable Knob Settings (Setup) This sub-mode is used to set up arpeggios, the assignable knobs, and other RS7000 functions. 4 pages are available: Arpeggio Setting, A/D Setup, Knob Assign, and MIDI Out Channel. The A/D Setup parameters are available on 3 sub pages accessible via the [F1] and [F4] buttons. Press the [SETUP] button from the PATTERN Play or Patch mode to go to the SETUP mode. Setup Features 8. Press a key on the keyboard while holding the [TRACK SELECT] button to select the track for which the MIDI out- G Setup settings are memorized with each style. put channel settings will apply. 9. Use [Knob 3] ~ [Knob 4] to make the required settings. 2 No extra save procedure is necessary. Your edited setup set- tings are saved with the style data and are automatically 10. Use the [EXIT] to move back through the Knob Assign, A/D recalled whenever a style is selected. Setup, and Arpeggio Setting pages, and finally to return to the If MEMORY PROTECT is ON, however (Page 257), the PATTERN Play (or Patch) mode. setup settings will not be saved and will be erased when a dif- ferent style is selected. NOTE The Pattern Mode Arpeggio Features When you need to make large value changes rotate a knob while holding the [SHIFT] button to change values in increments of 10 rather than 1. G Arpeggio performance can be recorded to phrases using real-time recording. G Play effects can be applied to arpeggio performance. This makes it possible to create an unlimited range of arpeggio patterns. G Arpeggio settings apply to all tracks. G Arpeggio settings are memorized with each style. No extra save procedure is necessary. Your arpeggio settings are saved with the style data and are automatically recalled whenever a style is selected. If MEMORY PROTECT is ON, however (Page 257), the arpeggio settings will not be saved and will be erased when a different style is selected. Arpeggio Performance Procedure 1. In the PATTERN Play or Patch mode press the [ARPEGGIO ON] button so that its indicator lights. The [KEYBOARD] button indicator will also light. 2. Arpeggio playback will begin when you hold one or more notes on the keyboard. 3. If the HOLD parameter in the Arpeggio Setting page is OFF the arpeggio will stop as soon as you release the keys. When the HOLD parameters is ON arpeggio playback can be stopped by pressing the [ARPEGGIO ON] button so that its indicator goes out. Setup Procedure 1. Press [SETUP] while in the PATTERN Play or Patch mode to access the Arpeggio Setting page. 2. Use [Knob 1] ~ [Knob 4] to make the required settings. 3. Press [SETUP] to go to the A/D Setup page. 4. Use [Knob 1] ~ [Knob 4] to make the required settings. 5. Press [SETUP] to go to the Knob Assign page. 6. Use [Knob 1] ~ [Knob 4] to make the required settings. 7. Press [SETUP] to go to the Out Channel page. RS7000 107