Yamaha RS7000 Owner's Manual - Page 119

12. Saving to Memory Card or Disk Display Parameters [PATTERN] → [SAVE] FILE TYPE = PATTERN, CARD or DISK = CARD Available Icon 2 PATTERN Knob 2] [Settings] Style ..... 01 ~ 64 Selects the pattern to be saved. This parameter is not available when the FILE TYPE parameter is set to "ALL". NOTE Empty styles which contain no data cannot be saved. The Pattern Mode 2 3 SCSI/CARD F4] 14 [Knob 1] [F1] 2 [Knob 2] 3 [Settings] SCSI, CARD [F4] SCSI The hard disk, ZIP disk, or other FILE TYPE = PATTERN, CARD or DISK = SCSI SCSI disk connected to the SCSI connector. Available Disk Type SCSI ID Icon CARD A memory card inserted in the card slot. 1 4 2 Partition Name 3 [Knob 1] [F1] [Knob 2] [F4] Selects the disk or card to which the data is to be saved. When CARD is selected and a properly formatted memory card is in the card slot, a memory card icon will appear along with the available memory on the card. When SCSI is selected and a properly formatted disk is connected to the SCSI connector, a disk icon will appear along with the disk description, SCSI ID number, partition name, and amount of available space in the partition. FILE TYPE = ALL, CARD or SCSI = CARD 4 OK F1] Available Icon Switches to the save execution page. I Save Execution Page [PATTERN] → [SAVE] → [F1] 1 4 3 [Knob 1] [F1] [F4] 1 FILE TYPE Knob 1] [Settings] PATT, ALL Specifies the type of data file to be saved. For descriptions of the various file types see "About File Types" on page 116. 0 [F1] 5 FILE NAME Knob 1] Moves the cursor for file-name entry. Use [Knob 1] to move the cursor to the desired character position, then use the keyboard to enter the desired character. Refer to "Chapter 1: Basics", page 67, for character-entry details. RS7000 119