Yamaha RS7000 Owner's Manual - Page 120

12. Saving to Memory Card or Disk NOTE File names can be a maximum of 8 characters in length (not including the extension). Further, the file extension cannot be changed. Characters which cannot be used in file names are automatically converted to "_". 6 Folder Select Knob 3] Selects the folder to which the file will be saved. To save to the currently selected folder, select "CurrentDir" at the top of the list. 5 7 6 8 9 [Knob 1] [F2] [Knob 3] [F3] [F4] 7 NEW F2] Creates a new folder. The folder-name entry display will appear. [Knob 2] [F3] [F4] This page allows entry of file names up to 8 characters in length. [Knob 2] moves the cursor to the desired character position. The keyboard is used to enter a character at the cursor position. Refer to "Chapter 1: Basics", page 67, for character-entry details. Press [F4] to create a folder and return to the save execution page. Press [F3] to abort folder creation and return to the save execution page. 8 (UP F3] Moves to the next highest folder in the folder hierarchy. 9 OPEN F4] Opens the selected folder, moving down one level in the folder hierarchy. 0 SAVE F1] Saves the file to the selected folder. When "CurrentDir" is selected, the file is saved to the currently selected folder. 120 RS7000 [2] Export Page Saves the selected sample or pattern to memory card or disk in a standard format - WAV or SMF - that can be handled by a personal computer. Export Procedure 1. Select the pattern containing the data to be exported while in the PATTERN Play or Patch mode. 2. Press the [SAVE] button twice from the PATTERN Play or Patch mode to go to the Save page. 3. Use [Knob 1] (FILE TYPE) to select the type of file you want to save. 4. If the "WAV" file type is selected, use [Knob 2] (TRACK) to select the track which uses the sample to be saved. 5. If the sample assigned to the selected track is a sample kit voice, use [Knob 3] (NOTE) to select the note to which the sample to be exported is assigned. 6. Press [F4] (CARD/SCSI) to specify whether you want to save to a memory card or disk. 7. Press [F1] (OK) to go to the save execution page. 8. Use [Knob 1] (FILE NAME) and the keyboard to enter a file name. 9. Use [Knob 3] to select the folder to which the file is to be saved. Select "CurrentDir" at the top of the list to save to the currently selected folder. As necessary use [F3]( )/[F4](OPEN) to move between folders, or [F2](NEW) to create a new folder. 10. Press [F1](EXPORT) to execute the export operation. If a file with the same file name already exists on the card or disk, the "Overwrite? NO[F2]/YES[F3]" confirmation message will appear. Press [F3] if it is OK to overwrite the existing file and replace it with the new file. Press [F2] to cancel the save operation and return to the status prior to pressing the [F1] button (step 5, above). 11. Press [EXIT] twice to return to the PATTERN Play or Patch mode. NOTE • When the file save destination is SCSI only DOS-formatted disks can be used (disks formatted by the RS7000 are formatted using DOS format). • When the export destination is SCSI it is necessary to select the appropriate SCSI ID and partition in the SCSI Setup page.