Yamaha RS7000 Owner's Manual - Page 209

12. Loading from Memory Card or Disk CARD or SCSI = SCSI Partition Name SCSI ID Disk Type Icon FILE TYPE = ALL, ALL+SYSTEM 4 6 8 [Knob 1] [F1] [F4] 2 1 [F1] [Knob 2] 3 FILE TYPE = SMPL [F4] Sample Voice Number 1 FILE TYPE Knob 2] [Settings] SONG, ALL, ALL+SYSTEM, SMPL SONG A single song is loaded into the specified style number in the inter- nal memory from a SONG type (.R2S) or ALL type (.R2A) file. 4 6 7 5 8 ALL An ALL type (.R2A) file is loaded [Knob 1] [F1] [F2] [Knob 4] [F4] 4 and all internal memory except the system setup data is overwritten. ALL+SYSTEM ...... An ALL type (.R2A) file is loaded 4 File Select Knob 1] The Song Mode and all internal memory including the system setup data is overwritten. SMPL A specified sample from multiple sample voices included in a PATT (.R2P), SONG (.R2S),or ALL (.R2A) type file can be loaded to the specified sample voice number. Specifies the type of data file to be loaded. For details about the various file types see "About File Types" on page 116. 2 SCSI/CARD F1] 3 OK F4] I Load Execution Page [SONG] → [LOAD] → [F4] FILE TYPE = SONG 5 SONG, TRACK Knob 4] [Settings] Song Select (when FILE TYPE = SONG 01 ~ 20 Track Select (when FILE TYPE = SMPL 01 ~ 16 • When the selected FILE TYPE is SONG. Selects the song to which the data will be loaded. The name of the selected song is displayed. • When the selected FILE TYPE is SMPL. Selects the track to which the data will be loaded. If a sample voice is assigned to the selected track and the number of the assigned sample is the same as that of the sample to be loaded, the "REPLACE" appears to indicate that the existing sample will be replaced by the loaded sample. If no sample voices are assigned to the selected track then an empty sample voice number will be displayed and "EMPTY" will appear to indicate that the sample will be loaded to empty memory. 4 7 [Knob 1] [F2] 5 [Knob 4] RS7000 209