Yamaha RS7000 Owner's Manual - Page 110

10. Arpeggio & Assignable Knob Settings (Setup) NOTE When a knob is operated during pattern playback, playback of the style data corresponding to the parameter assigned to that knob will stop. For example, if a knob assigned to reverb send is operated during pattern playback, the reverbsend style data will stop playing back. Playback will resume normally after playback is stopped, the style number is changed, or the section is changed. [4] Out Channel Page [PATTERN] → [SETUP] × 4 The parameters in this page assign the MIDI transmit channel for each track and output destination: the tone generator and MIDI A and B connectors. 3 TR (Track) [Settings] 01 ~ 16 Selects the track for which a transmit channel is to be assigned. To select a track press the appropriate key on the keyboard while holding the [TRACK SELECT] button. NOTE The graphic display on the left side of the LCD shows the MIDI channel assignments for TG (the internal tone generator), MA (MIDI A), and MB (MIDI B). The upper area of this display indicates the MIDI transmit channel assignments for each track. The boxes in the lower area of the display indicate when the MIDI channel assignment for the corresponding destination is OFF or not. An empty box indicates OFF, and a solid filled box indicates that a transmit channel, 01 ~ 16, is assigned. 3 1 [Knob 3] 2 [Knob 4] 1 OUT SELECT Knob 3] [Settings] TG, MIDI A, MIDI B TG Output is sent to the RS7000 tone generator. MIDI A Output is sent to the MIDI OUT A connector. MIDI B Output is sent to the MIDI OUT B connector. Determines the MIDI output for which a channel number is to be assigned. 2 OUT CHANNEL Knob 4] [Settings] OFF, 01 ~ 16 OFF No MIDI data is transmitted. 01 ~ 16........... MIDI data is transmitted on the specified channel. Specifies the MIDI transmit channel. 110 RS7000