Yamaha RS7000 Owner's Manual - Page 79
RS7000, BPM Tempo, LENGTH, EVENT TYPE, BANK Voice Bank, PGM Program Number
View all Yamaha RS7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
3. Phrase Recording NOTE • When the OVERDUB record type is selected, quantization will also be applied to the existing data in the track. The first playback, however, will not be affected (quantization will be applied, however). • When record quantize is not OFF, quantization is applied to all controller data in addition to the note data. Use the Quantize job to quantize only the note data. 4 BPM (Tempo Knob 4], [F4] → [Knob 4], [SHIFT]+[F4] → Numeric Keypad This parameter has the same effect as in the PATTERN Play mode. See page 72 for details. 5 LENGTH This parameter specifies the length of the phrase to be recorded in measures. This parameter cannot be set in the Rec Standby mode. Be sure to set the LENGTH parameter in the PATTERN Play mode before engaging Rec Standby. NOTE For example, to create a 1-measure phrase that will repeat during an 8-measure pattern, do the following: 1. In the PATTERN Play mode set the LENGTH to 1. 2. Record the new phrase. 3. In the PATTERN Play mode set the LENGTH back to 8. 6 EVENT TYPE Knob 3] When the STEP record type is selected this parameter specifies the type of event to be recorded. [Settings] NOTE, PITCH BEND, CC[000] ~ CC[119] Specifies the type of data to be recorded. When NOTE is selected notes data is recorded. When PITCH BEND is selected pitch bend change data is recorded. When CC[000] ~ CC[119] is selected, the corresponding control change data is recorded: volume, pan, expression, etc. For CC[000] ~ CC[119], select the control number of the data (volume, pan, expression, etc.) that you wish to record. Only when inputting the control change number, you can use [SHIFT] + [F3] for numeric key input. Record Standby (PATTERN Patch) 1 [Knob 1] [F1] [SHIFT]+[F1] 2 [Knob 2] [SHIFT]+[F2] 3 [Knob 3] 1 BANK (Voice Bank Knob 1], [F1] → [Knob 1], 2 [SHIFT]+[F1] → Numeric Keypad The Pattern Mode 2 PGM (Program Number) Knob 2], [SHIFT]+[F2] → Numeric Keypad [Settings] Voice Bank (Bank Select MSB, LSB) *** *** (Phrase), 000 000 (GM), 063 000 (SyBa&Ld), 063 001 (SyPd&Fx1), 063 002 (SyMater1), 063 003 (BandInst), 063 004 (Cls&Wind), 063 005 (Eth&Perc), 063 006 (SFX1), 063 007 (SyBa&Ld2), 063 008 (SyPd&FX2), 063 009 (SFX2), 064 000 (SmpLocal), 064 001 (SmpCmn), 126 000 (DrumKit), 127 000 (GM Drum) Program Number 001 ~ 128 (depends on the voice bank) Selects a voice for the phrase to be recorded. Voice banks organize voices in voice-type categories, and are selected using MIDI bank select MSB and LSB data. For more details on voice banks refer to "Chapter 1: Basics", page 61. The program number parameter selects the individual voices in each bank. To access the BANK LSB, press [F1] to move the cursor to the LSB value then use [Knob 1] to adjust. NOTE The voice selected here is used when the voice bank parameter in the PATTERN mode MIXER display (Page 93) is set to "Phrase". 3 TRNS ON/OFF (Transpose ON/OFF)........ [Knob 3] [Settings] ON, OFF Determines whether transpose setting changes will affect the phrase to be recorded. When ON, transpose setting changes will transpose the recorded data. When OFF, transpose setting changes will not affect the recorded data. It is a good idea to turn this parameter OFF when recording drum phrases or other phrases you do not want to be transposed. RS7000 79