Yamaha RS7000 Owner's Manual - Page 126

13. Loading from Memory Card or Disk 13. Loading from Memory Card or Disk This sub mode is used to load data from a memory card or disk. 4 display pages are provided: Load, Import, SCSI Setup, and SCSI Communication. Press [LOAD] from the PATTERN Play or Patch mode to go to the Load display. NOTE • Refer to "Chapter 12: Saving to Memory Card or Disk" for information about the types of memory cards and disks that can be used with the RS7000. (Page 114) • If the memory protect function is ON, "Memory Protected" will appear on the display when the [F1] button is pressed and it will not be possible to load data. In this case go to the UTILITY mode System page (Page 257) and turn MEMORY PROTECT "OFF". Load Page Structure The LOAD sub-mode includes the following display pages. G Load...(Page 126) Loads data into the internal memory from memory card or disk. G SCSI Communication...(Page 132) Allows communication with the YAMAHA TWE Wave Editor application running on a personal computer. G Import...(Page 129) Loads sequence or sample data saved to disk using other equipment, or saved to memory card or disk by a computer. [1] Load Page Loads data to internal memory from a memory card or disk. Load Procedure G SCSI Setup...(Page 131) Provides access to a number of SCSI settings. 1. Press the [LOAD] button from the PATTERN Play or Patch mode to go to the Load page. 2. Use [Knob 2] (FILE TYPE) to select the type of file you want to load. 3. Press [F1] (CARD/SCSI) to specify whether you want to load from a memory card or disk. 4. Press [F4] (OK) to go to the load execution page. 5. Use [Knob 1] to select the file to be loaded. If the file to be loaded is inside a folder, Use [F1] ( ) and [F2] (OPEN) to move to the folder containing the file. 6. Use [Knob 4] to select the style or track to which the data is to be loaded. If the ALL file type was selected in step 2, this parameter does not need to be set and will appear as a blank on the display. 126 RS7000