Yamaha RS7000 Owner's Manual - Page 111
Master EQ and Effects
View all Yamaha RS7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
11. Master EQ and Effects 11. Master EQ and Effects The MASTER sub-mode provides access to the master EQ parameters which adjust the sound at the final output stage, and the master effect parameters. The Master EQ parameters are available on 3 sub pages accessible via the [F1] and [F4] buttons, and the Master Effect parameters are available on 5 sub pages accessible via the [F1] and [F4] buttons. Press the [MASTER] button from the PATTERN Play or Patch mode to go to the MASTER mode. The MASTER settings apply to all styles and songs. Master Setup Procedure Master Effect 2 The Pattern Mode 1. Press [MASTER] while in the PATTERN Play or Patch mode to access the Master EQ display page. 2. Use [Knob 1] ~ [Knob 4] to make the required settings. 3. Press [MASTER] to go to the Master Effect page. 4. Use [Knob 1] ~ [Knob 4] to make the required settings. 5. Use the [EXIT] to move back to the Master EQ page, and finally to return to the PATTERN Play (or Patch) mode. NOTE When you need to make large value changes rotate a knob while holding the [SHIFT] button to change values in increments of 10 rather than 1. Master Effects provide a number of sophisticated sound processing options at the final output stage of the RS7000. A block diagram of the Master Effects is given below. NOTE • The Master EQ and Master Effects do not apply to the assignable outputs. • The Master EQ and Master effects apply to all signals output via the stereo outputs, and are ideal for final "master" processing of the sound. Display Parameters Master EQ The Master EQ is a 4-band equalizer which can be used to adjust the sound at the final output stage of the RS7000. The Master EQ allows the type of response control shown in the graph below via 3 parameter pages: GAIN, FREQUENCY, and Q. [1] Master EQ Page [PATTERN] → [MASTER] Level LOW Q MID1 Q MID2 Q LOW GAIN MID1 GAIN MID2 GAIN LOW FREQ. MID1 FREQ. MID2 FREQ. HIGH Q HIGH GAIN HIGH FREQ. Frequency 1 [Knob 1] 2 [Knob 2] 3 [Knob 3] 4 [F4] [Knob 4] 1 LOW GAIN Knob 1] [Settings] -24 dB ~ +24 dB Sets the amount of low-frequency gain (boost or cut). 2 MID1 GAIN Knob 2] [Settings] -12 dB ~ +12 dB Sets the amount of low-mid gain (boost or cut). RS7000 111