Yamaha RS7000 Owner's Manual - Page 73

1. Pattern Playback 7 BPM (Tempo Knob 4], [F4] → [Knob 4], 0 Track [SHIFT]+[F4] → Numeric Keypad [Settings] 01 ~ 16 [Settings] 001.0 ~ 300.0 (BPM) Sets the pattern playback tempo. Use [Knob 4] to adjust the BPM in steps of 1, or press [F4] to move the cursor to the right of the decimal point and use [Knob 4] to adjust in steps of 0.1. NOTE BPM can also be set by using the [TAP] button (Page 68). Shows the track numbers. The currently selected track number is highlighted. [Track Selection Procedure] Hold the [TRACK SELECT] button and press the white key on the keyboard corresponding to the track to be selected. The corresponding key indicator will flash. The track numbers are listed above the white keys. While the [TRACK SELECT] button is held the indicators above the keys will light continuously, flash, or remain off to indicate the status of the track, as follows: 2 The Pattern Mode 8 OCT (Octave) [Settings] -5 octaves ~ +5 octaves Lit The corresponding track contains data. Flashing... The corresponding track is selected. Off The corresponding track does not contain data. Shows the current octave setting of the keyboard. Each " " on the display corresponds to one octave down, and each " " corresponds to one octave up. The keyboard octave can be changed by pressing the [KEYBOARD] button so that its indicator lights, and then using the [OCT DOWN] and [OCT UP] buttons to set the octave. Press the [OCT DOWN] and [OCT UP] buttons simultaneously to restore the normal keyboard octave settings (no octave shift). 9 Transpose [Settings] -36 ~ 0 ~ +36 (semitones) TRACK SELECT Hold 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1 K ! L # M $ N % O & P ' Q ( R ) S - T @ U ^ V _ W { X } Y ~ TRANSPOSE(-) TRANSPOSE(+) Transposes the pitch of pattern playback. Transposition is set in semitone increments. A setting of "12" transposes by one octave. [Procedure] Transposition is set by holding the [TRANSPOSE] button and pressing the key on the keyboard corresponding to the desired amount of transposition above or below the central C (track 8) key. While the [TRANSPOSE] button is held the middle C indicator will light and the indicator of the selected transpose key will flash. If a black key is specified the indicators on either side of the key will flash. To transpose by more than an octave first press the [OCT DOWN] or [OCT UP] button and then the keyboard. NOTE If both the [KEYBOARD] and [MUTE] button indicators are out, tracks can be directly selected by pressing the white keys on the keyboard. The sequence in the corresponding track will play while the key is held. Tracks can also be selected by using the black [TR-] and [TR+] keys while holding the [TRACK SELECT] button. TRANSPOSE CAPS Hold A B C D E F G H I J TRACK SELECT Hold A B C D E F G H I J ALL 1~8 9~16 TR- TR+ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1 ALL 1~8 9~16 TR- TR+ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1 K ! L # M $ N % O & P ' Q ( R ) S - T @ U ^ V _ W { X } Y ~ TRANSPOSE(-) TRANSPOSE(+) K ! L # M $ N % O & P ' Q ( R ) S - T @ U ^ V _ W { X } Y ~ TRANSPOSE(-) TRANSPOSE(+) RS7000 73