Yamaha RS7000 Owner's Manual - Page 130

13. Loading from Memory Card or Disk Specifies the type of data file to be imported. Some imported samples may play at an unexpected pitch, loop playback may change, or the sound quality may vary. Voice edit and effect settings will not be reproduced when an RM1x PATT file is imported. Voices may also change. Furthermore, sequence data in tracks which use preset phrases cannot be reproduced. For details about the various file types see "About File Types" on page 116. 2 SCSI/CARD F1] [Settings] SCSI, CARD SCSI The hard disk, ZIP disk, or other SCSI disk connected to the SCSI connector. CARD A memory card inserted in the card slot. Selects the disk or card from which the data is to be imported. When CARD is selected and a properly formatted memory card is in the card slot, a memory card icon will appear along with the available memory on the card. When SCSI is selected and a properly formatted disk is connected to the SCSI connector, a disk icon will appear along with the disk description, SCSI ID number, and partition name. 3 OK F4] Switches to the import execution page. I Import Execution Page [PATTERN] → [LOAD] × 2 → [F4] FILE TYPE = SAMPLE Sample Voice Number 4 7 8 [Knob 1] [F1] [F2] 5 [Knob 3] 96 [F4] [Knob 4] FILE TYPE = SMF, RM1x PATT Style Number Section 4 File Select Knob 1] Selects the file to be imported. Only files matching the selected file type are shown in the list. If the file to be loaded is inside a folder, Use [F1] ( ) and [F2] (OPEN) to move to the folder containing the file. 5 TRACK Knob 3] [Settings] 01 ~ 16 Selects the track to which the data will be imported when the FILE TYPE is SAMPLE. 6 TYPE Knob 4] [Settings] PITCHED, KIT: C-2 ~ G8 Selects the sample voice to be imported when the file type is set to SAMPLE. The available settings will depend on the type of sample voice assigned to the selected track. G When a pitched sample is assigned to the selected track. Two choices will be available: PITCHED SAMPLE and SAMPLE KIT. When SAMPLE KIT is selected you will also need to specify a note name. "REPLACE" will appear on the display, and the existing data will be overwritten when the data is imported. G When a sample kit is assigned to the selected track. The sample voice type cannot be changed. You will need to specify the note name to which the data will be loaded. If the specified note name is empty, "EMPTY" will appear on the display. If a sample voice is assigned to the specified note name, "REPLACE" will appear on the display and the existing data will be overwritten. G When a sample voice is assigned to the selected track. Two choices will be available: PITCHED SAMPLE and SAMPLE KIT. When SAMPLE KIT is selected you will also need to specify a note name. "EMPTY" will appear on the display, and the number of the newly created sample voice will be displayed. 7 (UP F1] Moves to the next highest folder in the folder hierarchy. 8 OPEN F2] Opens the selected folder, moving down one level in the folder hierarchy. 4 [Knob 1] 8 Pattern Name [F2] 130 RS7000