Yamaha RS7000 Owner's Manual - Page 243

3. Sample Editing Sample Voice = SAMPLE KIT VOICE 6 7 1 2 3 4 5 [Knob 1] [Knob 2] [Knob 3] [Knob 4] [F4] [SHIFT]+[F1] 1 ORIGINAL KEY Knob 1] [Settings] Pitched Voice ORIGINAL KEY ... C-2 (000) ~ G8 (127) Sample Kit Voice ORIGINAL KEY ... C-2 ~ G8 PITCH 24 ~ +24 (display only) 4 PLAY MODE Knob 4] [Settings] FORWARD, REVERSE, LOOP, ATK+LOOP FORWARD ......... The sample plays from the START point to the END point. REVERSE The sample plays in reverse from the END point to the START point. LOOP The sample loops repeatedly from the START point to the END point. ATK+LOOP ........ After playing from the START(ATCK) point to the END point, the sample loops between the START(LOOP) point and the END point. Specifies the sample playback mode. START FORWARD REVERSE LOOP END Specifies the original key of the selected sample. The original key is the key (note) that will play the sample at the pitch at which it was originally recorded. [Knob 1] selects the original key. ATK+LOOP NOTE When the target is a Sample Kit Voice, the key to which the sample being edited is assigned is displayed in a semitone-increment pitch relationship to the specified original key note (PITCH =). For example, if the original key and the key of the sample being edited are the same, the pitch relationship is "PITCH = 0" and the sample will play at the originally recorded pitch. If the key to which the sample is assigned is one semitone higher the original key, then the pitch relationship is "PITCH = +1" and the sample will sound one semitone higher than the original key. START(ATCK) START(LOOP) 5 The Sampling Mode NOTE START, START(ATCK), START(LOOP), and END are set in the Trim page (Page 241). 5 AUDITION F4] The sample will loop between the specified START and END points while this button is held. This lets you hear precisely how the settings are affecting the sample. 6 VOICE (Sample Voice Number) 2 VOLUME Knob 2] [Settings] 0 ~ 63 This is the same parameter as in the Trim page (Page 241). 7 Sample Information Individually sets the volume of each voice in a Sample Kit Voice. These are the same as in the Trim page (Page 241). 3 PAN Knob 3] [Settings] L63 ~ C ~ R63 Individually sets the pan position of each voice in a Sample Kit Voice. RS7000 243