Yamaha RS7000 Owner's Manual - Page 127
RS7000, FILE TYPE, SCSI/CARD, type .R2P or ALL type .R2A file.
View all Yamaha RS7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
13. Loading from Memory Card or Disk 7. Press [F4] to execute the load operation. If the destination style or sample voice already contains data the "Are You Sure? No[F2]/Yes[F3]" confirmation prompt will appear. The confirmation prompt will always appear when the "ALL" file type is selected. Press [F3] if it is OK to overwrite the corresponding memory 1 FILE TYPE Knob 2] [Settings] PATT, ALL, ALL+SYSTEM, SMPL PATT (Pattern A single style is loaded into the specified style number in the internal memory from a PATT contents. Press [F2] to abort the load operation and return to the status of the RS7000 prior to pressing the [F1] button. 8. Press [EXIT] to return to the PATTERN Play or Patch mode. NOTE When the LOAD service is a SCSI disk it is necessary to select the appropriate SCSI ID and partition in the SCSI Setup page. type (.R2P) or ALL type (.R2A) file. ALL An ALL type (.R2A) file is loaded and all internal memory except the system setup data is overwritten. ALL+SYSTEM 2 An ALL type (.R2A) file is loaded and all internal memory including the system setup data is overwrit- ten. The Pattern Mode SMPL A specified sample from multiple Display Parameters sample voices included in a PATT (.R2P), SONG (.RS2), or ALL (.R2A) type file can be loaded to the speci- [PATTERN] → [LOAD] fied sample voice number. CARD or DISK = CARD Specifies the type of data file to be loaded. For details about the various file types see "About File Types" on page 116. 2 1 [F1] [Knob 2] CARD or DISK = SCSI Partition Name SCSI ID Disk Type Icon 2 SCSI/CARD F1] [Settings] SCSI, CARD SCSI The hard disk, ZIP disk, or other SCSI disk connected to the SCSI 3 connector. [F4] CARD A memory card inserted in the card slot. Selects the disk or card from which the data is to be loaded. When CARD is selected and a properly formatted memory card is in the card slot, a memory card icon will appear along with the available memory on the card. When SCSI is selected and a properly formatted disk is connected to the SCSI connector, a disk icon will appear along with the disk description, SCSI ID number, and partition name. 2 1 [F1] [Knob 2] 3 OK F4] 3 Switches to the load execution page. [F4] I Load Execution Page [PATTERN] → [LOAD] → [F4] RS7000 127