Yamaha RS7000 Owner's Manual - Page 136
RS7000, Swing Gate Time, Phrase, Range, Set All, Modify Velocity
View all Yamaha RS7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
14. Pattern & Phrase Editing - The Pattern Jobs The Swing Rate range depends on the selected quantize value. If the quantize value is , , , or Front beat Back beat NOTE If a swing value other than 100% results in notes being positioned after other non-swing notes, the latter notes are delayed accordingly. 0% 50% 75% 100% Specified range A setting of 100% is equivalent to twice the length of the specified quantize value. A setting of 50% produces exact timing and therefore no swing feel. Settings above 51% increase the amount of swing, with 75% being equivalent to a dotted-note delay. [Settings] 50 ~ 75% (50% is the initial value) If the quantize value is , , or Front beat Back beat 6 Swing Gate Time [Settings] 000% ~ 200% Adjusts the gate time (the length of time a note sounds) of the even-numbered back-beat notes to enhance the swing feel. When a triplet quantize value is used, the gate time of the last note of each triplet is adjusted. When the quantize value is or , the gate time of the even-numbered or beats will be adjusted. A setting of 100% retains the original gate time. If the resultant gate time 0 or less it will be set to 1. 02 Modify Velocity 0% 33% 66% 83% 100% 3 Specified range A setting of 100% is equivalent to three times the length of the specified quantize value. A setting of 66% produces exact timing and therefore no swing feel. Settings above 67% increase the amount of swing, with 83% being equivalent to a sextuplet delay. [Settings] 66% ~ 83% (66% is the initial value) If the quantize value is or Front beat Back beat This job alters the velocity values of the specified range of notes. Velocity changes are calculated as follows: Adjusted velocity = (original velocity × Rate) + Offset If the result is 0 or less, the value is set to 1. If the result is higher than 127, the value is set to 127. 1 2 5 [Knob 2] 4 3 [Knob 3] [F4] 0% 33% 50% 66% 100% 3 Specified range A setting of 100% is equivalent to twice the length of a or note. A setting of 50% produces exact timing and therefore no swing feel. Settings above 51% increase the amount of swing, with 66% being equivalent to a triplet delay. [Settings] 50% ~ 66% (50% is the initial value) 1 Phrase [Settings] 001 ~ 256 2 Range [Settings] Measure:Beat:Clock 001:1:000 ~ 257:1:000 Sets the range of measures/beats/clocks over which the job is applied. 3 Set All [Settings] Off (0), 001 ~ 127 Sets the velocities of all target notes to the same fixed value (1 to 127). When set to "OFF" the Set All parameter has no effect. When set to a value other than "OFF" the Rate and Offset parameters are unavailable and appear as "***" on the display. 136 RS7000