Yamaha RS7000 Owner's Manual - Page 245

4. The Sample Jobs I Select a Job 3. Use [Knob 1] (CATEGORY) and [Knob 2] (JOB) to move the cursor to the desired job. 4. Press [F4] (SELECT) to go to the selected job page. I Executing Jobs 01 (COPY) ~ 04 (MOVE) 5. Use [Knob 1] (SAMPLE) and [Knob 2] (KEY) to select the target sample. Press [F2] (AUDITION) to audition the selected sample. 01 COPY Copies the specified sample to a different sample number. When the target is a Sample Kit Voice, samples assigned to each key number can be copied individually. 6. For the COPY and MOVE jobs use [Knob 3] (SAMPLE) and [Knob 4] (TYPE) to select the destination sample. 7. Press [F4] (DO!) to execute the job. 8. Press [EXIT] 4 times to return to the original display page. I Executing Jobs 05 (NORMALIZE) ~ 11 (LOOP REMIX) 5. Use [Knob 1] (SAMPLE) and [Knob 2] (KEY) to select the target sample. Press [F2] (AUDITION) to audition the selected sample. 1 2 5 [F2] 3 4 6 [Knob 1] [Knob 2] [Knob 3] [Knob 4] [F4] 1 SAMPLE (Source Sample Number Knob 1] [Settings] 001 ~ 128, C001 ~ C128 6. Use [Knob 3] and [Knob 4] to set the job parameters as required. Specifies the source sample voice. 7. Press [F4] (DO!) to execute the job. Press [F2] (AUDITION) 2 KEY (Source Key Number Knob 2] to audition the processed sample. [Settings] C-2 ~ G8 8. If the results aren't satisfactory you can re-adjust the parameters using [Knob 3] and [Knob 4] and then press [F4] (DO!) Specifies the key number of the source sample. again to re-execute the job. 9. Press [F3] (CREATE) to actually save the processed sample NOTE 5 to the target sample number, overwriting the original sample. This parameter is not available when the speci- If the original sample is a Pitched Sample it will be overwrit- fied source sample is a Pitched Voice. ten at this point. If the original sample is part of a Sample Kit Voice a key-number selection page will appear in which [Knob 2] can be used to select the key number. Pressing [F3] (OK) then overwrites the sample. 3 SAMPLE (Destination Sample Number Knob 3] 10. Press [EXIT] 4 times to return to the original display page. [Settings] 001 ~ 128, C001 ~ C128 The Sampling Mode NOTE When the DELETE or other job has been used to delete a sample voice assigned to the currently selected track, pressing [EXIT] will skip the Sample Edit page and return to the original page. Specifies the destination sample voice. 4 TYPE (Destination Type Knob 4] [Settings] PITCHED, KIT: C-2 ~ G8 Specifies the type of the destination sample voice. Selects the sample key number when the destination sample is a Sample Kit Voice type. NOTE The PITCHED option is not available when a Sample Kit Voice is stored in the destination sample voice number. 5 AUDITION F2] Plays the specified copy source sample. 6 DO F4] Executes the job. RS7000 245