Yamaha RS7000 Owner's Manual - Page 95

7. Adjusting Level and Effects for Each Track (Mixer) EQ TYPE = BOOST EQ TYPE = LOW&HIGH 2 Q (Bandwidth Knob 2] [Settings] 0 ~ 31 Specifies the bandwidth, or range of frequencies, to be affected by boost or cut when the PEQ type is selected. The specified frequency range is centered at the specified EQ frequency (below). Small Q Large Q + 2 Gain Equalizer - The Pattern Mode 5 [Knob 3] 6 [F4] [Knob 4] Frequency Frequency [F1] 7 8 [Knob 2] [Knob 3] EQ TYPE = THRU 1 EQ TYPE Knob 1] [Settings] Low&High, PEQ, BOOST6, BOOST12, BOOST18, THRU Low&High ....... Independent control of Low and High EQ bands. PEQ Parametric Equalizer - provides control of center frequency and Q (bandwidth) as well as boost/cut. BOOST6 Provides a 6-dB level boost. BOOST12 ......... Provides a 12-dB level boost. BOOST18 ......... Provides a 18-dB level boost. THRU The equalizer is bypassed. Specifies the type of equalization to be applied to each track. 3 FREQUENCY Knob 3] [Settings] 139.7 Hz ~ 12.9 kHz Sets the center (or cutoff) frequency of the frequency band to be equalized. 4 GAIN (Output Select Knob 4] [Settings] -32 ~ +32 Specifies the amount of boost or cut to be applied to the EQ frequency band. 5 LOW FREQ. (Low Frequency Knob 3] [Settings] 50.1 Hz ~ 2.00 kHz Sets the cutoff frequency for the EQ band adjusted by the LOW GAIN parameter, below. 6 LOW GAIN Knob 4] [Settings] -32 ~ +32 Boosts or cuts the low frequency band, below the cutoff frequency set by the LOW FREQ parameter, above. 7 HIGH FREQ. (High Frequency Knob 2] [Settings] 503.8 Hz ~ 10.1 kHz Sets the cutoff frequency for the EQ band adjusted by the HIGH GAIN parameter, below. 8 HIGH GAIN Knob 3] [Settings] -32 ~ +32 Boosts or cuts the high frequency band, above the cutoff frequency set by the HIGH FREQ parameter, above. RS7000 95