Yamaha RS7000 Owner's Manual - Page 94

7. Adjusting Level and Effects for Each Track (Mixer) 2 PROGRAM (Program Number Knob 3] [Settings] Voice Bank (Bank Select MSB, LSB) *** *** (Phrase), 000 000 (GM), 063 000 (SyBa&Ld1), 063 001 (SyPd&FX1), 063 002 (SyMater1), 063 003 (BandInst), 063 004 (Cls&Wind), 063 005 (Eth&Perc), 063 006 (SFX1), 063 007 (SyBa&Ld2), 063 008 (SyPd&FX2), 063 009 (SFX2), 064 000 (SmpLocal), 064 001 (SmpCmn), 126 000 (DrumKit ), 127 000 (GM Drum) Program Number 001 ~ 128 (depends on the voice bank) Assigns a voice to each track for pattern playback. Voice banks organize voices in voice-type categories, and are selected using MIDI bank select MSB and LSB data. The program number parameter selects the individual voices in each bank. When the BANK MSB and LSB are set to "*** *** (Phrase)", the voice specified for the phrase assigned to that track is used. (Page 79) NOTE See "Chapter 1: Basics", page 61 for details about voice banks. 3 HOLD (Voice Parameter Hold Knob 4] [Settings] OFF, ON OFF edited absolute voice parameters will be reset. ON edited absolute voice parameters will be retained. Determines whether edited absolute voice parameters will be retained when a different voice is selected. When "OFF" the absolute voice edit parameters are initialized each time a voice is selected. When "ON" the absolute voice edit parameters are retained. NOTE The LFO User Wave parameters, Coarse Tune, Detune, Pitch Bend Range, and Pitch Bend are all absolute parameters, but their value will be held whether ON or OFF. 1 VOLUME Knob 1] [Settings] 000 ~ 127 Sets the volume level of the selected track. 2 PAN Knob 2] [Settings] L63 ~ L01, C, R01 ~ R63 Sets the stereo pan position of the selected track. 3 RANDOM PAN Knob 3] [Settings] -64 ~ 0 ~ 63 Sets the depth of random pan for the selected track. When set to "0" no panning occurs. Other values produce a random pan position each time a note is played. 4 OUTPUT SEL (Output Select Knob 4] [Settings] L&R, AS1, AS2, AS3, AS4, AS5, AS6, AS1&2, AS3&4, AS5&6 L&R Output is sent to the RS7000 OUTPUT jacks. AS1, AS2, AS3, AS4, AS5, AS6, AS1&2, AS3&4, AS5&6 These settings send output to the cor- responding individual outputs on the optional AIEB2 I/O Expansion Board (Page 20). Specifies the output to which the sound from each track will be sent. The assignable outputs on the optional AIEB2 I/O Expansion Board can be used to separately output specified patterns or samples for processing via separate external audio devices. AS1 through AS6 are mono output settings, while AS1&2, AS3&4, and AS5&6 output a stereo program to the specified output pair. EQ TYPE = PEQ [3] Equalizer Page [PATTERN] → [MIXER] × 3 [2] Volume/Pan/Out Page [PATTERN] → [MIXER] × 2 1 [Knob 1] 2 [Knob 2] 3 [Knob 3] 4 [Knob 4] 1 [Knob 1] 94 RS7000 2 [Knob 2] 3 [Knob 3] 4 [Knob 4]