Yamaha RS7000 Owner's Manual - Page 182

1. Song Playback 1. Song Playback Select and play songs. This display always appears first when the [SONG] button is pressed to enter the SONG mode. Song Playback Procedure 1. Select the playback SONG number. 2. When the [PLAY] button is pressed the PLAY indicator will flash and song playback will begin. 3. Press [STOP] to stop playback. NOTE • The parameters in the SONG Play page can be changed during song playback. Changes made during playback are saved as song data (when MEMORY PROTECT is OFF). • When the UTILITY mode VOICE SETUP TO TG (Page 261) parameter is OFF, the mixer, voice edit, and effects will not change when a different song is selected. • Press [START] while holding [SHIFT] for repeat song playback. Display Parameters 8 2 9 A 0 1 3 [Knob 1] [F1] [SHIFT]+[F1] [Knob 1] 4 56 [Knob 2] [Knob 3] [SHIFT]+[F2] [SHIFT]+[F3] 7 [Knob 4] [F4] [SHIFT]+[F4] 2 Song Name [Settings] Song Number Song Name 01 ~ 20 Display only The song to be played back is selected by specifying the song number. Refer to "13. The Song Jobs", page 212 for information on entering song names. 3 Meter F1] → [Knob 1] [Settings] 1/16 ~ 16/16, 1/8 ~ 16/8, 1/4 ~ 8/4 Sets the meter (time signature) of the song. Press [F1] to move the cursor to METER, and then use [Knob 1]. 4 JUMP Knob 2], [SHIFT]+[F2] → Numeric Keypad [Settings] OFF, 001 ~ 999 Specifies the measure to which the song position will jump when playback is stopped. Press [STOP] while holding [SHIFT] to set the current measure for jump location. This can be turned OFF by pressing [ ] or [ ] while holding [SHIFT]. 5 Measure ........ [Knob 3], [SHIFT]+[F3] → Numeric Keypad 6 Beat [Settings] Measure Beat 001 ~ 999 01 ~ 16 (display only) Show the current measure number and beat during playback. NOTE The , , and buttons can also be used to change the measures number (also during playback). 1 SONG (Song Number) Knob 1], [SHIFT]+[F1] → Numeric Keypad 182 RS7000