Yamaha RS7000 Owner's Manual - Page 93

7. Adjusting Level and Effects for Each Track (Mixer) 7. Adjusting Level and Effects for Each Track (Mixer) This sub-mode is used to adjust pattern-playback volume levels, effect levels, and other parameters individually for each track. 4 pages are available: Voice Select, Volume/Pan/Out, Equalizer, and Effect Send. The equalizer parameters are available on 2 sub pages accessible via the [F1] and [F4] buttons. Press the [MIXER] button from the PATTERN Play or Patch mode to go to the MIXER Voice Select page. Mixer Features 7. Use [Knob 1] ~ [Knob 4] to make the required settings. 8. Press [MIXER] to go to the Effect Send page. 2 The Pattern Mode G This mode functions as a "mixer" which allows adjustment of individual track levels, pan, effect send and other parameters during pattern playback. G Regardless of the voices specified for the phrases used, voices can be assigned for each style. G Mixer parameters are also saved when a pattern is saved to memory card or disk as an SMF (Standard MIDI File) file. G The mixer settings are memorized with the style. No extra save procedure is necessary. Your mix and voice settings are saved with the style data and are automatically recalled whenever a style is selected. If MEMORY PROTECT is ON, however (Page 261), the mix and voice settings 9. Use [Knob 1] ~ [Knob 4] to make the required settings. 10. Use the [EXIT] to move back through the EQ 1/2, Volume/ Pad/Out and Voice Select pages, and finally to return to the PATTERN Play (or Patch) mode. NOTE • When you need to make large value changes rotate a knob while holding the [SHIFT] button to change values in increments of 10 rather than 1. • Using the four panel EFFECT SEND/VOLUME knobs you can directly edit the corresponding mixer parameters without having to access the mixer displays. will not be saved and will be erased when a different style is selected. G Absolute and relative parameters. Absolute parameters are parameters which directly control the corresponding function. Relative parameters, on the other hand, function more like offset values which shift some other value by a specified amount. In the mixer sub mode, only the RANDOM PAN DEPTH parameter is relative. Display Parameters [1] Voice Select Page [PATTERN] → [MIXER] Mixer Setup Procedure 1. Press [MIXER] while in the PATTERN Play or Patch mode to access the Voice Select display page. 2. Select the track to be adjusted (Page 69). 3. Use [Knob 1] ~ [Knob 4] to make the required settings. 4. Press [MIXER] to go to the Volume/Pan/Out page. 5. Use [Knob 1] ~ [Knob 4] to make the required settings. 6. Press [MIXER] to go to the EQ 1/2 page. 1 [Knob 1] 2 [Knob 3] 3 [Knob 4] 1 BANK Knob 1] RS7000 93