Yamaha RS7000 Owner's Manual - Page 109
Rs7000, Input Gain, Mono/stereo, Volume 1, Reverb Send 1/2, Delay Send 1/2, Variation Send 1/2
View all Yamaha RS7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
10. Arpeggio & Assignable Knob Settings (Setup) NOTE When the MONO/STEREO parameter is set to MONO × 2, the [F1] and [F4] buttons can be used to switch pages providing access to individual REVERB SEND 1/2, DELAY SEND 1/2, and VARIATION SEND 1/2, and PAN 1/2 parameters for each channel. A/D settings for the INPUT L jack are provided in A/D Setup page 2/3, and settings for the INPUT R jack are provided in A/D Setup page 3/3. 7 VARIATION SEND 1/2 Knob 3] [Settings] 0 ~ 127 Adjusts the level of the signal sent to the VARIATION effect stage. "0" produces the dry signal only, and "127" produces the variation sound only. 8 PAN 1/2 Knob 4] [Settings] L63 ~ CENTER ~ R53 Adjusts the stereo pan position of the A/D input signal. 2 The Pattern Mode 1 INPUT GAIN Knob 1] [Settings] MIC, LINE Matches the input gain of the INPUT L and R jacks to the type of source used. The MIC setting produces input gain high enough for direct microphone input, while the LINE setting lowers the gain for optimum matching with line-level sources. This INPUT GAIN setting also applies to SAMPLING procedure (Page 229). [3] Knob Assign Page [PATTERN] → [SETUP] × 3 This knob allows a range of parameters and tracks to be assigned to the panel knobs. The 4 LFO DEPTH and EG knobs can be independently set for AMO, FILTER, and PITCH. Assignments can be made for up to 31 knobs. 2 MONO/STEREO Knob 2] [Settings] MONO × 2, STEREO Determines whether signals input via the INPUT L and R jacks will be handled as separate mono signals (MONO × 2), or as a stereo pair (STEREO). 3 VOLUME 1 Knob 3] [Settings] 0 ~ 127 Adjusts the volume of the input signal. processed this parameters adjusts the volume of the INPUT L signal, and when a stereo signal is being received it adjusts the volume of the L and R inputs. 4 VOLUME 2 Knob 4] [Settings] 0 ~ 127 Adjusts the volume of the input signal. When a mono signal is being processed this parameters adjusts the volume of the INPUT R signal. This parameter cannot be set when MONO/STEREO is set to STEREO. 5 REVERB SEND 1/2 Knob 1] [Settings] 0 ~ 127 Adjusts the level of the signal sent to the REVERB effect stage. 6 DELAY SEND 1/2 Knob 2] [Settings] 0 ~ 127 Adjusts the level of the signal sent to the DELAY/CHORUS effect stage. 1 [Knob 1] 2 [Knob 2] 3 [Knob 4] 1 KNOB SELECT Knob 1] [Settings] 1 ~ 31 Specifies the knob to which a parameter or tracks will be assigned. 2 PARAMETER (MIDI OUT Knob 2] Specifies the parameter to be assigned to the knob selected via KNOB SELECT, above. Control numbers 001 ~ 119 (except 32), pitch bend, BPM, as well as play effect and MIDI delay parameters can be assigned. 3 TRACK Knob 4] [Settings] AUTO, 01 ~ 16 Specifies the track to be controlled by the knob selected via KNOB SELECT, above. When set to AUTO, the selected track will be automatically assigned to the knob. When set to 01 ~ 16, the specified track is assigned to the knob regardless of the currently selected track. RS7000 109