Yamaha RS7000 Owner's Manual - Page 14

The Controls & Connectors [SWING/VELOCITY] Knob With the initial default settings, this knob provides realtime control of the PLAY FX SWING and VELOCITY parameters. SWING adjusts the timing of the 8th-note up (back) beats to create a bounce or swing feel (Page 89). VELOCITY adjusts the velocity of the notes (Page 88). [SELECT] Button Selects one of the two functions/parameters assigned to each knob. The indicator next to the currently selected parameters will light. 9 [EFFECT SEND/VOLUME] Knobs In addition to the functions described here, these knobs are fully assignable and can be set up to control a wide range of functions and parameters. Since the knobs allow continuous parameter control for the selected track, they can be used for creative real-time performance sound control. The default assignments for these knobs are the main MIXER parameters. Refer to "Chapter 2: The Pattern mode", page 69, for more information on the MIXER parameters. [DRY VARI] Knob [REVERB] Knob EFFECT SEND / VOLUME DRY VARI DELAY/CHO REVERB TRACK VOLUME [DELAY/CHO] Knob [TRACK VOLUME] Knob [DRY VARI] Knob (Page 96) With the initial default settings, this knob provides realtime control of the MIXER DRY SEND LEVEL parameter. This adjusts the level of the signal sent to the dry line. [DELAY/CHO] Knob (Page 96) With the initial default settings, this knob provides realtime control of the MIXER DELAY/CHORUS SEND LEVEL parameter. This adjusts the level of the signal sent to the delay or chorus effect. [REVERB] Knob (Page 96) With the initial default settings, this knob provides realtime control of the MIXER REVERB SEND LEVEL parameter. This adjusts the level of the signal sent to the reverb effect. [TRACK VOLUME] Knob (Page 94) With the initial default settings, this knob provides realtime control of the volume of the currently selected track. 14 RS7000 0 LFO Knobs In addition to the functions described here, these knobs are fully assignable and can be set up to control a wide range of functions and parameters. Since the knobs allow continuous parameter control for the selected track, they can be used for creative real-time performance sound control. 3 functions can be assigned to the [DEPTH] knob, selected by the [AMP/FILTER/PITCH] button B to its right. The default assignments for these knobs are the main LFO parameters. [WAVE] Button LFO WAVE SPEED USER [SPEED] Knob S&H PGM DEPTH [DEPTH] Knob [SPEED] Knob (Page 98) With the initial default settings, this knob provides realtime control of the LFO SPEED parameter. [DEPTH] Knob (Page 98) With the initial default settings, this knob provides realtime control of the LFO DEPTH parameter. Depending on the function selected by the [AMP/FILTER/PITCH] button B, the [DEPTH] knob can control the depth of a tremolo, wow, or vibrato effect. [WAVE] Button (Page 98) Selects the LFO waveform. A [EG] Knobs In addition to the functions described here, these knobs are fully assignable and can be set up to control a wide range of functions and parameters. 3 parameters are assigned to each knob, selectable via the [AMP/FILTER/PITCH] button B. Since the knobs allow continuous parameter control for the selected track, they can be used for creative real-time per- formance sound control. The default assignments for these knobs are the main MIXER parameters. Refer to "Chapter 2: The Pattern mode", page 69, for more information on the MIXER parameters. [ATTACK] Knob [SUSTAIN] Knob EG ATTACK DECAY SUSTAIN RELEASE [DECAY] Knob [RELEASE] Knob