Yamaha RS7000 Owner's Manual - Page 144

14. Pattern & Phrase Editing - The Pattern Jobs 4 Set All [Settings] Off (0), 000 ~ 127 (-8192 ~ +8191 for pitch bend) Sets all target events to the same fixed value. When set to "OFF" the Set All parameter has no effect. When set to a value other than "OFF" the Rate and Offset parameters are unavailable and appear as "***" on the display. 5 Rate [Settings] 000% ~ 200%, *** Specifies the percentage by which the target events will be shifted from their original values. When the Set All parameter is not "OFF" this parameter appears as "***" and cannot be changed. 6 Offset [Settings] -127 ~ +127, *** (-8192 ~ +8191 for pitch bend, ***) Adds a fixed value to the Rate-adjusted event values. When the Set All parameter is not "OFF" this parameter appears as "***" and cannot be changed. 17 Beat Stretch This job performs time expansion or compression over the selected range. All events in the specified range - including note step time, gate time, all event locations, etc., - are expanded or compressed. 1 Phrase [Settings] 001 ~ 256 2 Range [Settings] Measure:Beat:Clock 001:1:000 ~ 257:1:000 Sets the range of measures/beats/clocks over which the job will be applied. 3 Time [Settings] 025% ~ 400% Sets the amount of time expansion or compression as a percentage. Settings higher than 100% produce expansion, and settings below 100% produce compression. 18 Copy Phrase Copies a selected phrase to the designated destination phrase. CAUTION Any previous data in the copy destination will be overwritten. 1 2 NOTE Only MIDI data is affected by this job. Sample voices are not expanded or compressed. However, for samples recorded using the SLICE+SEQ feature, the Beat Stretch job expands or compresses the timing of the note data, step times, and gate times that control playback of the sliced samples. The sample voice itself is not affected. 1 2 [Knob 2] 3 [Knob 3] [F4] 144 RS7000 5 3 [Knob 2] 4 [Knob 3] [F4] 1 Source style [Settings] 01 ~ 64 Specifies the style containing the phrase to be copied. 2 Source phrase [Settings] Phrase Category US (User Phrase) For the preset phrase categories refer to "Appendix", page 271. Phrase Number 001 ~ (depends on phrase category) Selects the phrase to be copied. 3 Destination style [Settings] 01 ~ 64 Specifies the destination style.