Yamaha RS7000 Owner's Manual - Page 118
Save Structure, Save Procedure, 1] Save - file structure
View all Yamaha RS7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
12. Saving to Memory Card or Disk Save Page Structure The SAVE sub-mode includes the following display pages. G Save...(Page 118) Saves data from the internal memory to memory card or disk. [1] Save Page Saves internal data to a memory card or disk. Save Procedure G Export...(Page 120) Saves the selected sample or pattern to memory card or disk in a standard format - SMF or WAV - that can be handled by a personal computer. 1. Press the [SAVE] button from the PATTERN Play or Patch mode to go to the Save page. 2. Use [Knob 1] (FILE TYPE) to select the type of file you want to save. 3. If the "PATT" file type is selected, use [Knob 2] (PATTERN) to select the style to be saved. 4. Press [F4] (CARD/SCSI) to specify whether you want to save to a memory card or disk. 5. Press [F1] (OK) to go to the save execution page. 6. Use [Knob 1] (FILE NAME) and the keyboard to enter a file name. 7. Use [Knob 3] to select the folder to which the file is to be saved. Select "CurrentDir" at the top of the list to save to the currently selected folder. As necessary use [F3]( )/[F4](OPEN) to move between folders, or [F2](NEW) to create a new folder. G Rename...(Page 122) Changes the file name of a file stored on memory card or disk. NOTE When the save destination is SCSI it is necessary to select the appropriate SCSI ID and partition in the SCSI Setup page. G Delete...(Page 123) Deletes a specified file from memory card or disk. G Format...(Page 124) Formats a memory card or disk. 8. Press [F1](SAVE) to execute the save operation. If a file with the same file name already exists on the card or disk, the "Overwrite? NO[F2]/YES[F3]" confirmation message will appear. Press [F3] if it is OK to overwrite the existing file and replace it with the new file. Press [F2] to cancel the save operation and return to the status prior to pressing the [F1] button (step 5, above). 9. Press [EXIT] to return to the PATTERN Play or Patch mode. NOTE When the file save destination is SCSI only DOS-formatted disks can be used (disks formatted by the RS7000 are formatted using DOS format). 118 RS7000