Adaptec iSA1500 User Guide - Page 39
Installing the Disk Drives, Connecting a Monitor and Keyboard, RS-232 port. See
![]() |
UPC - 760884143346
View all Adaptec iSA1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Getting Started Quickly Installing the Disk Drives To install the disk drives: 1 Install the first disk drive by pushing the button on the right and opening the lever fully before sliding it into the enclosure until the lever engages. 2 Close the lever to push the drive fully into its slot and snap it into place. 3 Repeat until all four disk drives are installed. Connecting a Monitor and Keyboard To configure the Adaptec iSA1500, connect a monitor to the Video port and a keyboard to the Keyboard port. (The ports are shown in the Figure in Rear of Enclosure on page 1-3.) Alternatively, use a terminal emulation program through the RS-232 port. See Completing the Network Configurations on page 3-7 for the correct settings for accessing the Command Line Interface (CLI). 3-4
![](/manual_guide/products/adaptec-isa1500-user-guide-d36da57/39.png)