Brother International BES Lettering INSTRUCTION MANUAL - English - Page 81
Carved Fill Properties
View all Brother International BES Lettering manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Text Properties 79 Carved Fill Properties In addition to the density and stitch-length settings described above there are a few extra fill settings that apply only to the Carved fills. You can adjust these Carved pattern settings in the Properties box. The settings allow you to change a fill pattern's characteristics such as the size and angle of the fill pattern. The following figures show some different effects you can create using the Carved Fill settings. Original (scale at 100%) Emboss Scale at 50% To change the Emboss Scale of a Carved pattern: 1 Select a Carved fill segment 2 In the Fill area of the Properties Panel, do the following: Click the Emboss Scale box to select this property. In the Emboss Scale field, enter a percentage value to adjust the scaling. 3 Click Apply. To change the Emboss Angle of a Carved pattern: 1 Select a Carved fill segment 2 In the Fill area of the Properties Panel, do the following: Click the Emboss Angle box to select this property. In the Emboss Angle field, enter a percentage value to adjust the angle. 3 Click Apply. You see your segment altered accordingly.