Canon imageCLASS 2220 User Guide - Page 157

Image Separation This mode automatically divides an original into equal sections, and copies each section in an enlarged form onto a separate sheet. The following two Image Separation features are available: 1 to 2 (1-sided and 2 2-sided copies), and 1 to 4 (1-sided and 2-sided copies). Additional Copy Functions IMPORTANT • When the machine is operating in the Image Separation mode, you cannot use the Entire Image, Saddle Stitch, Two-sided, Two-page Separation, Cover/Sheet Insertion, Image Combination, Shift (No. Key Entry), Booklet, Transparency Interleaving, Different Size Originals, Frame Erase, Image Repeat, or Form Composition modes. • If you use the Remote or Cascade Copy mode while the machine is operating in the Image Separation mode, you cannot set a pattern for the last page of the original. • Originals copied using the Image Separation mode must all be the same size.You cannot use the Different Size Originals mode in combination with the Image Separation mode. • Place the original on the platen glass. You cannot copy an original in the Image Separation mode from the feeder. NOTE The enlargement ratio is automatically set to match the designated paper size. I 1 To 2 Divides a one-sided original into two equal sections, and outputs the sections in an enlarged form as two 1-sided copies or one 2-sided copy. Original Copies or 1 2 1 1 2 NOTE You can place LTR originals horizontally or vertically when using this feature. When placed vertically, each page is divided into upper and lower sections. 2-46 Image Separation