Canon imageCLASS 2220 User Guide - Page 59

3 Press (Start). Copying starts. NOTE • To cancel this setting, press [Copy Ratio] © [Entire Image]. • To cancel all settings and return the machine to the Standard mode, 1 press (Reset). • Also, the Center Shift mode is automatically set when you set the Entire Image mode. Basic Copying Reducing/Enlarging Using the Original and Copy Paper Sizes (Zoom Program) You can change the copy ratio by specifying the original size and the copy paper size in inches. The available copy ratios are from 25% to 800% when the original is placed on the platen glass, and from 25% to 400% when the original is placed in the feeder. The following two Zoom Program modes are available. NOTE The specified sizes are converted into a copy ratio (%) by the machine using the formula below. Copy ratio (%) = (copy size / original size) x 100 I Making Copies with the Same XY Copy Ratio (Zoom): Specify the same copy ratio for both the vertical (Y) and horizontal (X) axes. Original Copy X = 4" (100 mm) LTR X = 5 7/8" (150 mm) LTR I Making Copies with Different XY Copy Ratios (XY Zoom): Specify different copy ratios for the vertical (Y) and horizontal (X) axes. 1-48 Changing the Copy Ratio (Copy Ratio)