Canon imageCLASS 2220 User Guide - Page 37
From the Copy Basic Features screen, select the copy, settings., Press, Start
View all Canon imageCLASS 2220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
NOTE • It is impossible to select two different machines other than your own for cascade copying. You must include your own machine as one of the output devices. • If Error Recovery for Cascade Copy is set to 'On', the remaining copy job is not processed in the following cases: - The machine is scanning originals for the Cascade Copy mode. - The Cascade Copy mode is used in combination with the Cover/Sheet Insertion 1 mode. - The Cascade Copy mode is used in combination with the Different Size Originals, Auto Paper Selection, and Two-Sided modes. Basic Copying - The normally operating printer has completed the cascade copy job. - An error occurs in the normally operating printer. - The cascade copy job has almost finished. - The number of copies is less than six. • If Error Recovery for Cascade Copy is set to 'On', a machine in which an error occurs cannot continue to print out the remaining pages of a copy job. Even if it recovers, the remaining pages of a copy job are reassigned to another printer. 3 From the Copy Basic Features screen, select the copy settings. NOTE • When you use a remote copy printer, only those copy settings supported by the selected remote copy printer are available. • When cascade copying, you cannot select copy settings that are not supported by the remote copy printer. Also, if you select a remote copy printer equipped with a different finisher, only the Collate and Group modes can be set. 4 Press (Start). Copying starts. NOTE For instructions on how to cancel a remote copy or cascade copy job, see Chapter 2, "Checking Job and Device Status," in the Reference Guide. 1-26 Selecting an Output Device (Select Output Device)