Canon imageCLASS 2220 User Guide - Page 34
Press, Start., If Error Recovery for Cascade Copy is set
View all Canon imageCLASS 2220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Basic Copying NOTE • You must select a remote copy printer that supports the selected copy settings. The printers that do not support the selected settings are shown, but are grayed out. Even if the remote copy printer supports the Copy mode, and if you select settings other than Collate and Group, you can select only a remote copy printer equipped with the same finisher as the original copy machine. • It is impossible to select two different machines other than your own for cascade copying. You must include your own machine as one of the output devices. 1 • If Error Recovery for Cascade Copy is set to 'On', the remaining copy job is not processed in the following cases: - The machine is scanning originals for the Cascade Copy mode. - The Cascade Copy mode is used in combination with the Cover/Sheet Insertion mode. - The Cascade Copy mode is used in combination with the Different Size Originals, Auto Paper Selection, and Two-Sided modes. - The normally operating printer has completed the cascade copy job. - An error occurs in the normally operating printer. - The cascade copy job has almost finished. - The number of copies is less than six. • If Error Recovery for Cascade Copy is set to 'On', a machine in which an error occurs cannot continue to print out the remaining pages of a copy job. Even if it recovers, the remaining pages of a copy job are reassigned to another printer. 3 Press (Start). Copying starts. NOTE For instructions on how to cancel a remote copy or cascade copy job, see Chapter 2, "Checking Job and Device Status," in the Reference Guide. Selecting an Output Device (Select Output Device) 1-23