Cisco 1601 Hardware Installation Guide - Page 72
Connecting Serial HWICs to the Network, Related Documentation
View all Cisco 1601 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Related Documentation Serial Interface Cards Cable for the 8-Port and 16-Port Asynchronous HWICs The 8-port and 16-port asynchronous HWICs use an octal cable, consisting of a 68-pin connector on the interface card end and eight RJ45 connectors on the system end. See Figure 43. This cable is available in DTE format only. Figure 43 Octal Serial Cable 127422 Connecting Serial HWICs to the Network To connect the serial HWIC to the network, follow these steps: Step 1 Step 2 Step 3 Step 4 Step 5 Confirm that the router is turned off. Connect one end of the appropriate serial cable to the connector on the card faceplate. Connect the other end (or ends) of the cable to the appropriate type of equipment. Turn on power to the router. Check that the CONN LED goes on, which indicates that the card's serial port detects a WAN serial connection. Related Documentation Related documentation is available on Cisco.com or on the Product Documentation DVD. For more information, see the "Obtaining Documentation, Obtaining Support, and Security Guidelines" section on page 13. • 2-Port Async/Sync WAN Interface Card (WIC-2A/S), tech note • Understanding the 1-Port Serial WAN Interface Card (WIC-1T), tech note OL-12843-01 12