Compaq Armada 7700 Armada 7700 Family of Personal Computers Reference Guide - Page 128

Removing a Memory Expansion Slot Cover To remove the memory expansion slot cover: ! WARNING: Failure to unplug the power cord and remove the battery pack before installing a memory expansion board can damage the equipment and expose you to the risk of electrical shock. CAUTION: Electrostatic discharge (ESD) can damage electronic components. Before beginning this procedure, ensure that you are properly grounded. For more information, refer to Appendix C, "Electrostatic Discharge." 1. Save your work, exit all applications, and shut down the computer. NOTE: If you are unsure whether the computer is off or in Hibernation, turn the computer on, then shut it down. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power cord and remove any battery pack(s) in the computer. 4. Turn the computer bottom side up on a flat surface with the rear panel facing you. 5. Remove the screw 1 attaching the memory expansion slot cover to the computer. 6. Slide right, then lift away the memory expansion slot cover 2. Removing the Memory Expansion Slot Cover Increasing RAM 11-3