Compaq Armada 7700 Armada 7700 Family of Personal Computers Reference Guide - Page 131
Replacing the Memory Expansion Slot Cover, Torx T-8 screw.
View all Compaq Armada 7700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Replacing the Memory Expansion Slot Cover To replace the memory expansion slot cover: 1. Lay the memory insulator 1 over the installed memory expansion board (s), ensuring that all edges of the memory insulator are tucked inside the memory expansion compartment. 2. Replace the memory expansion slot cover 2 by placing it flush right over the memory expansion compartment, then sliding it left until it is seated. 3. Attach the memory expansion slot cover to the computer with a memory expansion slot cover security screw 3 or a standard Torx T-8 screw. Replacing a Memory Expansion Slot Cover 11-6 Increasing RAM
11-6
Increasing RAM
Replacing the Memory Expansion Slot Cover
To replace the memory expansion slot cover:
1. Lay the memory insulator
1
over the installed memory
expansion board (s), ensuring that all edges of the
memory insulator are tucked inside the memory
expansion compartment.
2. Replace the memory expansion slot cover
2
by placing it
flush right over the memory expansion compartment, then
sliding it left until it is seated.
3. Attach the memory expansion slot cover to the computer with
a memory expansion slot cover security screw
3
or a standard
Torx T-8 screw.
Replacing a Memory Expansion Slot Cover