Compaq Armada 7700 Armada 7700 Family of Personal Computers Reference Guide - Page 147
Securing a Memory Expansion Board, that attaches the memory expansion slot cover
View all Compaq Armada 7700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Securing a Memory Expansion Board On a model that ships with an empty memory expansion compartment, the memory expansion slot cover is attached to the computer with a standard Torx T-8 screw. To secure the memory expansion slot cover with one of the two tamper-resistant memory expansion slot cover screws supplied with the computer: 1. Place the computer on a flat surface, bottom side up. 2. Use a Torx T-8 screwdriver to remove the factory-installed screw 1 that attaches the memory expansion slot cover 2 to the computer. Removing the Factory-Installed Screw NOTE: For information about adding memory and installing a memory expansion board, refer to Chapter 11, "Increasing RAM." Securing the Computer 13-11
Securing the Computer
13-11
Securing a Memory Expansion Board
On a model that ships with an empty memory expansion
compartment, the memory expansion slot cover is attached to the
computer with a standard Torx T-8 screw.
To secure the memory expansion slot cover with one of the two
tamper-resistant memory expansion slot cover screws supplied
with the computer:
1. Place the computer on a flat surface, bottom side up.
2. Use a Torx T-8 screwdriver to remove the factory-installed
screw
1
that attaches the memory expansion slot cover
2
to
the computer.
Removing the Factory-Installed Screw
NOTE:
For information about adding memory and installing a
memory expansion board, refer to Chapter 11, “Increasing RAM.”