Compaq Armada 7700 Armada 7700 Family of Personal Computers Reference Guide - Page 153

To run Computer Checkup: 1. Ensure that the computer is connected to external power. (A low-battery condition could initiate Hibernation and interrupt the program.) 2. Turn on the external devices that you want to test. Connect the printer if you plan to print the log of errors. 3. Turn on or restart the computer, then press F10 when the cursor appears upper right on the screen. 4. Select Computer Checkup (TEST) from the Compaq Utilities menu. 5. Select View Device List. 6. Verify that Computer Checkup correctly detected the devices installed. s If the list is correct, select OK to exit the dialog box. s If the list is incorrect, ensure that any new devices are installed properly. If you do not find an installation problem, call your Compaq authorized service provider. NOTE: To make a selection in the Installed Compaq Devices dialog box, press Alt + the letter underlined on the button. 7. Select one of the following and follow the onscreen instructions. s Quick Check Diagnostics runs a quick, general test on each device with a minimal number of prompts. If errors are found, they are displayed when the testing is complete. s Automatic Diagnostics runs unattended and performs maximum testing of each device with minimal prompts. You can choose how many times to run the tests, to stop on errors, or to print or save a log of errors. s Prompted Diagnostics allows maximum control over the device testing process. You can choose attended or unattended testing, decide to stop on errors, or choose to print or save a log of errors. 14-4 Computer Setup and Diagnostics