Compaq Armada 7700 Armada 7700 Family of Personal Computers Reference Guide - Page 177
Solving PC Card Problems
View all Compaq Armada 7700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
Solving Modem Problems Continued Problem Possible Cause No dial tone (continued). Speaker Control AT Command (ATM) is set to 0. Phone line noise is Hang-up Delay S causing a Register (S10) is set disconnection. too low. Solution To set the Speaker Control to 1: 1. Click StartÆ ProgramsÆ AccessoriesÆ HyperTerminal. 2. Go to Command Mode, type ATM1, then press Enter. 3. Type ATH1 and listen for the sound of the dial tone. To change S10 default to 150: 1. Click StartÆ ProgramsÆ AccessoriesÆ HyperTerminal. 2. Go to Command Mode, type ATS10=150, then press Enter. NOTE: This command causes the modem to take longer to disconnect even if there is no noise on the line. Solving PC Card Problems If you are running Windows NT, refer also to the Help program within CardWare. To access CardWare, click StartÆ ProgramsÆCardWare. Problem Possible Cause Computer does not beep when PC Card is inserted, but PC Card works correctly. System beeps are turned down. Solution Press Fn+F5, then press the right cursor key to increase the system beeps volume. Continued 16-20 Troubleshooting