Compaq Armada 7700 Armada 7700 Family of Personal Computers Reference Guide - Page 129

Removing a Memory Expansion Board This section tells how to remove a memory expansion board from a memory expansion slot. If you are not replacing an installed memory expansion board, refer to the following section, "Inserting a Memory Expansion Board." To remove an installed memory expansion board: 1. Lift and hold back the memory insulator 1. 2. Pull away the plastic retention clips on each side of the memory expansion board to release it 2. The memory expansion board tilts toward you. 3. Lift the edge of the memory expansion board and slide it gently out of the memory expansion slot at a 45-degree angle 3. 4. Place the removed memory expansion board in an electrostatic-safe container. Releasing and Removing an Installed Memory Expansion Board 11-4 Increasing RAM