Dell E310dw Dell Printer Users Guide - Page 112

Ethernet (Wired Network Only), Wired Status, MAC Address, WLAN Assistant (Wireless Network Only)

Page 112 highlights

to any setting except Static. APIPA Selecting On will cause the print server to automatically allocate a link-local IP address in the range (169.254.1.0 169.254.254.255) when the print server cannot obtain an IP address through the Boot Method you have set. Selecting Off means the IP address does not change when the print server cannot obtain an IP address through the Boot Method you have set. IPv6 This machine is compatible with IPv6, the next generation Internet protocol. The default setting is Off. If you want to use the IPv6 protocol, select On. NOTE: If you set IPv6 to On , turn off the power switch, and then turn it back on to enable this protocol. NOTE: After you set IPv6 to On , this setting will be applied to both the wired and wireless LAN interface. Ethernet (Wired Network Only) NOTE: If you set this value incorrectly, you may not be able to communicate with your print server. Wired Status This field displays the current wired network status. MAC Address The MAC Address (Ethernet Address) is a unique number assigned for the machine's network interface. You can check your machine's MAC Address on its control panel. WLAN Assistant (Wireless Network Only) This feature guides you through the wireless network configuration using the Setup Wizard. Setup Wizard (Wireless Network Only) The Setup Wizard guides you through the wireless network configuration. WPS/AOSS™ (Wireless Network Only) If your wireless LAN access point/router supports either WPS (PBC) or AOSS™ (automatic wireless mode), you can configure your Dell machine without a computer. NOTE: WPS refers to Wi-Fi Protected Setup™. NOTE: PBC refers to Push Button Configuration. NOTE: AOSS™ refers to AirStation One-Touch Secure System. 112 Network

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216

112
Network
to any setting except Static.
APIPA
Selecting
On
will cause the print server to automatically allocate a link-local IP address in the range (169.254.1.0 -
169.254.254.255) when the print server cannot obtain an IP address through the Boot Method you have set. Selecting
Off
means the IP address does not change when the print server cannot obtain an IP address through the Boot
Method you have set.
IPv6
This machine is compatible with IPv6, the next generation Internet protocol. The default setting is
Off
. If you want
to use the IPv6 protocol, select
On
.
NOTE:
If you set
IPv6
to
On
, turn off the power switch, and then turn it back on to enable this protocol°
NOTE:
After you set
IPv6
to
On
, this setting will be applied to both the wired and wireless LAN interface°
Ethernet (Wired Network Only)
NOTE:
If you set this value incorrectly, you may not be able to communicate with your print server°
Wired Status
This field displays the current wired network status.
MAC Address
The MAC Address (Ethernet Address) is a unique number assigned for the machine's network interface. You can
check your machine's MAC Address on its control panel.
WLAN Assistant (Wireless Network Only)
This feature guides you through the wireless network configuration using the Setup Wizard.
Setup Wizard (Wireless Network Only)
The Setup Wizard guides you through the wireless network configuration.
WPS/AOSS™ (Wireless Network Only)
If your wireless LAN access point/router supports either WPS (PBC) or AOSS™ (automatic wireless mode), you can
configure your Dell machine without a computer.
NOTE:
WPS refers to Wi-Fi Protected Setup™°
NOTE:
PBC refers to Push Button Configuration°
NOTE:
AOSS™ refers to AirStation One-Touch Secure System°