Dell E310dw Dell Printer Users Guide - Page 181

Wi-Fi Direct Push Button - PIN Code - Manual - Group Owner Device Info. Status Info. Device Name SSID IP Address Status Signal I/F Enable Network Reset - Channel Speed - You can easily configure your Wi-Fi Direct™ network settings using the one-button push method. You can easily configure your Wi-Fi Direct™ network settings using WPS with a PIN code. You can manually configure your Wi-Fi Direct™ network settings. Sets your machine as the Group Owner. You can see the device name of your machine. Displays SSID of Group Owner. Displays the IP Address of your machine. Displays the Wi-Fi Direct™ network status. Displays the current Wi-Fi Direct™ network signal strength. When your machine acts as Group Owner, the LCD always displays Strong. Displays the channel in use when the Status is G/O Active or Client Active. Displays the connecting speed when the Status is G/O Active or Client Active. Enables or disables the Wi-Fi Direct™ connection. Restores all network settings of the internal print server to the factory settings. *1 On connection to the network, if the machine's 'Boot Method' is 'Auto' the machine will attempt to set the IP address and Subnet Mask from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. [001-254]. [000-255]. If the 'Boot Method' of the machine is set to 'Static' you must manually enter an IP address from the machine's control panel. Reset Menu Level 1 Network Factory Reset Description Restores all network settings of the internal print server to the factory settings. Resets the machine and restores the printer settings (including command settings) to the factory settings. Machine Settings 181