Dell E310dw Dell Printer Users Guide - Page 180

Level 1, Description, MAC Address

Page 180 highlights

Network Level 1 Wired LAN WLAN Level 2 TCP/IP Ethernet Wired Status MAC Address Set to Default Wired Enable TCP/IP Setup Wizard WPS/AOSS WPS w/PIN Code WLAN Status MAC Address Set to Default WLAN Enable Level 3 Description Boot Method Chooses the IP method that best suits your needs. IP Address Enter the IP address. Subnet Mask Enter the Subnet mask. Gateway Enter the Gateway address. IP Boot Tries Specifies the number of attempts the machine will try to obtain an IP address when the Boot Method is set to any setting except Static. APIPA Automatically allocates the IP address from the link-local address range. IPv6 Enables or disables the IPv6 protocol. - Chooses the Ethernet link mode. - Displays Ethernet link status. - Displays MAC address of the machine. - Restores wired network settings of the internal print server to the factory settings. - Turns the wired interface on or off. Boot Method Chooses the IP method that best suits your needs. IP Address Enter the IP address. Subnet Mask Enter the Subnet mask. Gateway Enter the Gateway address. IP Boot Tries Specifies the number of attempts the machine will try to obtain an IP address when the Boot Method is set to any setting except Static. APIPA Automatically allocates the IP address from the link-local address range *1. IPv6 Enables or Disables the IPv6 protocol. - Configures the wireless network settings using the setup wizard. - Configures the wireless network settings using WPS or AOSS™ method. - Configures the wireless network settings using WPS with a PIN code. Status Displays wireless Ethernet link status. Signal Displays the signal condition. Channel Displays the channel in use when Status is Active. Speed Displays the connecting speed when Status is Active. SSID Displays SSID. Comm. Mode Displays the current Communication Mode. - Displays MAC address of the machine. - Restores wireless network settings of the internal print server to the factory settings. - Turns the wireless interface on or off. 180 Machine Settings

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216

180
Machine Settings
Network
Level 1
Level 2
Level 3
Description
Wired LAN
TCP/IP
Boot Method
Chooses the IP method that best suits your needs.
IP Address
Enter the IP address.
Subnet Mask
Enter the Subnet mask.
Gateway
Enter the Gateway address.
IP Boot Tries
Specifies the number of attempts the machine will try to obtain
an IP address when the
Boot Method
is set to any setting
except
Static
.
APIPA
Automatically allocates the IP address from the link-local address
range.
IPv6
Enables or disables the IPv6 protocol.
Ethernet
-
Chooses the Ethernet link mode.
Wired Status
-
Displays Ethernet link status.
MAC Address
-
Displays MAC address of the machine.
Set to
Default
-
Restores wired network settings of the internal print server to the
factory settings.
Wired Enable
-
Turns the wired interface on or off.
WLAN
TCP/IP
Boot Method
Chooses the IP method that best suits your needs.
IP Address
Enter the IP address.
Subnet Mask
Enter the Subnet mask.
Gateway
Enter the Gateway address.
IP Boot Tries
Specifies the number of attempts the machine will try to obtain
an IP address when the
Boot Method
is set to any setting
except
Static
.
APIPA
Automatically allocates the IP address from the link-local address
range
*1
.
IPv6
Enables or Disables the IPv6 protocol.
Setup Wizard
-
Configures the wireless network settings using the setup wizard.
WPS/AOSS
-
Configures the wireless network settings using WPS or AOSS™
method.
WPS w/PIN
Code
-
Configures the wireless network settings using WPS with a PIN
code.
WLAN Status
Status
Displays wireless Ethernet link status.
Signal
Displays the signal condition.
Channel
Displays the channel in use when
Status
is
Active
.
Speed
Displays the connecting speed when
Status
is
Active
.
SSID
Displays SSID.
Comm. Mode
Displays the current Communication Mode.
MAC Address
-
Displays MAC address of the machine.
Set to
Default
-
Restores wireless network settings of the internal print server to
the factory settings.
WLAN Enable
-
Turns the wireless interface on or off.