Dell PowerEdge M520 Dell Converged Enhanced Ethernet Command Reference - Page 119
Enables debugging for Link Layer Discovery Protocol LLDP., on 10 Gbps Ethernet
View all Dell PowerEdge M520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
debug lldp packet 6 debug lldp packet Synopsis Enables debugging for Link Layer Discovery Protocol (LLDP). debug lldp packet {all | interface {in | ex}tengigabitethernet slot/port} [both | detail [both | rx | tx] | rx | tx] no debug lldp packet {all | interface {in | ex}tengigabitethernet slot/port} Operands all Turns on LLDP packet debugging on all interfaces. interface Use this keyword to specify any of the following interfaces: extengigabitethernet Specifies a valid external 10 Gbps Ethernet interface. slot Specifies a valid slot number. port Specifies a valid port number. intengigabitethernet Specifies a valid internal 10 Gbps Ethernet interface. slot Specifies a valid slot number. port Specifies a valid port number. both Turns on debugging for both transmit and receive packets. detail Turns on debugging with detailed information. rx Turns on debugging for only received LLDP packets. tx Turns on debugging for only transmitted LLDP packets. Defaults By default, debugging is not turned on. Command Privileged EXEC mode Modes Description Use this command to enable debugging for Link Layer Discovery Protocol (LLDP). Use the no debug lldp packet command to disable debugging. Usage Guidelines Examples To display debugging outputs on a particular cmsh session, use the terminal monitor command. To enable debugging of LLDP for both received and transmitted packets on 10 Gbps Ethernet interface 0/1: switch#debug lldp packet interface intengigabitethernet 0/1 both switch#show debug lldp LLDP debugging status: Interface te0/1 : Transmit Receive See Also show debug lldp Dell Converged Enhanced Ethernet Command Reference 103 53-1002115-01