Dell PowerEdge M520 Dell Converged Enhanced Ethernet Command Reference - Page 64
Specifies the Layer 2 interface.
View all Dell PowerEdge M520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
3 show interface show interface Synopsis Displays the configuration and status of an interface. show interface [{in | ex}tengigabitethernet slot/port | port-channel number| switchport] Operands tengigabitethernet Specifies a valid 10 Gbps Ethernet interface. slot Specifies a valid slot number. port Specifies a valid port number. port-channel number Specifies the interface is a port-channel. The range of valid values is 1-63. switchport Specifies the Layer 2 interface. Defaults There are no default configurations for this command. Command EXEC mode Modes Description Use this command to show the running system status and configuration for a specified interface. Usage There are no usage guidelines for this command. Guidelines Examples To display information for a 10 Gbps Ethernet interface: switch#show interface intengigabitethernet 0/1 Interface name Switchport mode Ingress filter Acceptable frame types Default Vlan Active Vlans Inactive Vlans : InTenGigabitEthernet 0/7 : access : enable : all : 1 : 1 : - Interface name Switchport mode Ingress filter Acceptable frame types Default Vlan Active Vlans Inactive Vlans : InTenGigabitEthernet 0/1 : access : enable : all : 5 : 5 : - See Also show interface vlan 48 Dell Converged Enhanced Ethernet Command Reference 53-1002115-01