Dell PowerEdge M520 Dell Converged Enhanced Ethernet Command Reference - Page 18
CLI command modes, Accessing the CEE CLI command modes
View all Dell PowerEdge M520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
1 CLI command modes TABLE 2 Command mode EXEC Accessing the CEE CLI command modes Prompt switch> Privileged EXEC switch# Global switch(config)# configuration Interface Port-channel: configuration switch (conf-if-po-63)# 10-Gigabit Ethernet (CEE port): switch (conf-if-te-0/1)# VLAN: switch (conf-if-vl-1)# Protocol LLDP: configuration switch (conf-lldp)# Spanning-tree: switch (conf-mstp)# switch (conf-rstp)# switch (conf-stp)# Console and switch (config-line)# VTY (line) configuration Feature CEE map: configuration switch (config-ceemap)# FCoE map: switch (config-fcoe-map)# Standard ACL: switch (conf-macl-std)# Extended ACL: switch (conf-macl-ext)# Port Mirror: switch(config-mon-sess-1 How to access the command mode Description Enter the cmsh command at the Fabric OS prompt after you have logged in as an appropriate user. Display running system information and set terminal line parameters. From the EXEC mode, enter the enable command. This is the administrative mode which also includes EXEC mode commands and allows you to display and change system parameters. From the EXEC mode, enter the Configure features that affect the configure terminal EXEC command. entire switch. From the global configuration mode, specify an interface by entering one of the following interface types: • interface port-channel • interface • interface vlan Access and configure individual interfaces. From the global configuration mode, specify a protocol by entering one of the following protocol types: • protocol lldp • protocol spanning-tree mstp • protocol spanning-tree rstp • protocol spanning-tree stp Access and configure protocols. From the global configuration mode, configure a terminal connected through the console port by entering the line console command. Configure a terminal connected through a Telnet session by entering the line vty command. Configure a terminal connected through the console port or a terminal connected through a Telnet session. From the global configuration mode, specify a feature by entering one of the following feature names: • cee-map • fcoe-map • mac access-list • monitor session Access and configure CEE, FCoE, Port Mirroring, and ACL features. 2 Dell Converged Enhanced Ethernet Command Reference 53-1002115-01