Dell PowerEdge M520 Dell Converged Enhanced Ethernet Command Reference - Page 73

vlan classifier group 3 vlan classifier group Synopsis Operands Adds and deletes rules to a VLAN classifier group. vlan classifier group number [add rule number| delete rule number] no vlan classifier group number Specifies the VLAN group number for which rules are to be added or deleted. The range of valid values is 1-16. add rule number Specifies a rule is to be added. The range of valid values is 1-256. delete rule number Specifies a rule is to be deleted. The range of valid values is 1-256. Defaults There are no default configurations for this command. Command Global configuration mode Modes Description Use this command to add and delete rules from VLAN classifier groups. Usage Guidelines There are no usage guidelines for this command. Make sure your converged mode interface is not configured to classify untagged packets to the same VLAN as the incoming VLAN-tagged packets. By configuring a converged interface to classify untagged packets (by using classifiers or the default port vlan_id) to the same VLAN as VLAN-tagged packets coming into the interface, the FCoE hardware sends out untagged packets to the CNA. These packets may be dropped, disrupting communications. Examples To add rule 1 to VLAN classifier group 1: switch(config)#vlan classifier group 1 add rule 1 See Also none Dell Converged Enhanced Ethernet Command Reference 57 53-1002115-01