Dell PowerEdge M520 Dell Converged Enhanced Ethernet Command Reference - Page 290
dot1x reauthentication, Synopsis, Operands, Defaults, Command, Modes, Description, Usage, Guidelines
View all Dell PowerEdge M520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 290 highlights
17 dot1x reauthentication dot1x reauthentication Enables reauthentication on a port. Synopsis dot1x reauthentication Operands none Defaults There are no defaults for this command. Command Interface configuration mode Modes Description Use this command to enable reauthentication on a port. Usage There are no usage guidelines for this command. Guidelines Examples To enable reauthentication on a port: switch(config)#interface extengigabitethernet 0/16 switch(conf-if-te-0/16)#dot1x reauthentication See Also none 274 Dell Converged Enhanced Ethernet Command Reference 53-1002115-01
274
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
dot1x reauthentication
17
dot1x reauthentication
Enables reauthentication on a port.
Synopsis
dot1x reauthentication
Operands
none
Defaults
There are no defaults for this command.
Command
Modes
Interface configuration mode
Description
Use this command to enable reauthentication on a port.
Usage
Guidelines
There are no usage guidelines for this command.
Examples
To enable reauthentication on a port:
switch(config)#
interface extengigabitethernet 0/16
switch(conf-if-te-0/16)#
dot1x reauthentication
See Also
none