Dell PowerEdge M520 Dell Converged Enhanced Ethernet Command Reference - Page 249

rmon collection history 15 rmon collection history Synopsis Operands Collects the periodic statistical samples of Ethernet group statistics on an interface for later retrieval. rmon collection history number [buckets bucket_number | interval seconds | owner name] no rmon collection history number number Specifies the RMON collection control index value. The range of valid values is 1-65535. buckets bucket_number Specifies the maximum number of buckets for the RMON collection history. The range of valid values is 1 to 65535. interval seconds Specifies the alarm sample interval in seconds. The range of valid values is 1-2147483648. owner name Specifies the identity of the owner. The maximum number of characters is 32. Defaults The collection of RMON history is not enabled. Command Interface configuration mode Modes Description Use this command to collect Ethernet group statistics on an interface. Use the no rmon collection history command to disable the history. Usage There are no usage guidelines for this command. Guidelines Examples To collect RMON statistics for the owner admin on 10 Gbps Ethernet interface 0/1: switch(config)#interface intengigabitethernet 0/1 switch(conf-if-te-0/1)#rmon collection history 5 See Also show rmon history Dell Converged Enhanced Ethernet Command Reference 233 53-1002115-01