Dell PowerEdge M520 Dell Converged Enhanced Ethernet Command Reference - Page 175
Use this command to clear the spanning-tree counters on the interface.
View all Dell PowerEdge M520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
clear spanning-tree counter 11 clear spanning-tree counter Synopsis Clears all spanning-tree counters on the interface. clear spanning-tree counter [interface| port-channel number | {in | ex}tengigabitethernet slot/port] Operands interface Specifies the interface on which to clear the spanning-tree counters. port-channel number Specifies the port-channel number. The range of valid values is 1-63. tengigabitethernet slot port Specifies a valid 10 Gbps Ethernet interface. Specifies a valid slot number. Specifies a valid port number. Defaults There are no default configurations for this command. Command Privileged EXEC mode Modes Description Use this command to clear the spanning-tree counters on the interface. Usage If the interface operand is not specified, spanning-tree counters are cleared for all interfaces. Guidelines Examples To clear spanning-tree counters for all interfaces: switch#clear spanning-tree counter To clear spanning-tree counters for a 10 Gbps Ethernet interface: switch#clear spanning-tree counter interface intengigabitethernet 0/1 To clear spanning-tree counters for port-channel 23: switch#clear spanning-tree counter interface port-channel 23 See Also show spanning-tree Dell Converged Enhanced Ethernet Command Reference 159 53-1002115-01