Dell PowerEdge M520 Dell Converged Enhanced Ethernet Command Reference - Page 131
To display all the LLDP interface information for a selected interface
View all Dell PowerEdge M520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
show lldp interface 6 show lldp interface Synopsis Displays the LLDP status on the specified interface. show lldp interface [{in | ex}tengigabitethernet slot/port] Operands extengigabitethernet Specifies a valid external 10 Gbps Ethernet interface. slot Specifies a valid slot number. port Specifies a valid port number. intengigabitethernet Specifies a valid internal 10 Gbps Ethernet interface. slot Specifies a valid slot number. port Specifies a valid port number. Defaults There are no default configurations for this command. Command EXEC mode Modes Description Use this command to display the LLDP status on the specified interface. Usage There are no usage guidelines for this command. Guidelines Examples To display all the LLDP interface information for a selected interface: switch#show lldp interface intengigabitethernet 0/0 LLDP information for Te 0/0 State: Enabled Mode: Receive/Transmit Advertise Transmitted: 30 seconds Hold time for advertise: 120 seconds Re-init Delay Timer: 2 seconds Tx Delay Timer: 1 seconds DCBX Version : CEE Auto-Sense : Yes Transmit TLVs: Chassis ID Port ID TTL IEEE DCBX DCBX FCoE App DCBX FCoE Logical Link Link Prim Brocade Link DCBX FCoE Priority Bits: 0x8 See Also none Dell Converged Enhanced Ethernet Command Reference 115 53-1002115-01