Dell PowerEdge M520 Dell Converged Enhanced Ethernet Command Reference - Page 276

16 show qos interface show qos interface Synopsis Displays a summary of all QoS configurations applied on an interface. show qos interface {{in | ex}tengigabitethernet slot/port | linecard slot portset chip | all} Operands interface Use this keyword to specify any of the following interfaces: extengigabitethernet Specifies a valid external 10 Gbps Ethernet interface. slot Specifies a valid slot number. port Specifies a valid port number. intengigabitethernet Specifies a valid internal 10 Gbps Ethernet interface. slot Specifies a valid slot number. port Specifies a valid port number. interface Use this keyword to specify any of the following interfaces: linecard portset slot chip Reports the QoS configuration for all 10 Gbps Ethernet interfaces within an ASIC. Specifies the ASIC linecard slot number within the chassis. Specifies the ASIC number within the linecard. all Reports QoS configurations for all interfaces within the system. Defaults There are no default configurations for this command. Command EXEC mode Modes Description Use this command to display a summary of all QoS configuration applied on an interface, including QoS Provisioning mode, CEE map, Layer 2 priority, Traffic Class mapping, congestion control, and the scheduler policy. Usage If no interface is specified, QoS information about all interfaces is displayed. Guidelines Examples To display all of the configured QoS information for a 10 Gbps Ethernet interface: switch#show qos interface intengigabitethernet 0/1 Interface InTenGigabitEthernet 0/1 Provisioning mode cee CEE Map demo Default CoS 0 Interface trust cos CoS-to-CoS Mutation map 'default' In-CoS: 0 1 2 3 4 5 6 7 Out-CoS/TrafficClass: 0/4 1/4 2/6 3/4 4/4 5/4 6/4 7/4 Tail Drop Threshold 1081344 bytes Per-CoS Tail Drop Threshold (bytes) 260 Dell Converged Enhanced Ethernet Command Reference 53-1002115-01