Dell PowerEdge M520 Dell Converged Enhanced Ethernet Command Reference - Page 218
debug ip igmp all, There are no defaults for this command.
View all Dell PowerEdge M520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 218 highlights
12 debug ip igmp all debug ip igmp all Synopsis Displays all IGMP information. debug ip igmp {all | group [A.B.C.D [interface [{in | ex}tengigabitethernet slot/port] interface port-channel number| interface vlan vlan_id]]} Operands all A.B.C.D interface Displays all values. Specifies the group address, as a subnet number in dotted decimal format (for example, 10.0.0.1), as the allowable range of addresses included in the multicast group. Use this keyword to specify any of the following interfaces: vlan vlan_id Specifies which VLAN interface to display the snooping configuration related information. The range of valid values is 1-3583. extengigabitethernet Specifies a valid external 10 Gbps Ethernet interface. slot Specifies a valid slot number. port Specifies a valid port number. intengigabitethernet Specifies a valid internal 10 Gbps Ethernet interface. slot Specifies a valid slot number. port Specifies a valid port number. port-channel number Specifies the interface is a port-channel. The range of valid values is 1-63. Description Displays all of the IGMP packets received and sent, and IGMP-host related events. Defaults There are no defaults for this command. Command Privileged EXEC mode Modes User Guidelines There are no user guidelines for this command. Example none See Also none 202 Dell Converged Enhanced Ethernet Command Reference 53-1002115-01