Dell PowerEdge M520 Dell Converged Enhanced Ethernet Command Reference - Page 77
Interface Commands
View all Dell PowerEdge M520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Interface Commands Chapter 4 clear counters Synopsis Clears statistics on all interfaces on the switch. clear counters {all | access-list mac access_list_name | [interface port-channel number |{in | ex}tengigabitethernet slot/port | slot-id number]} Operands all Specifies to clear statistics on all interfaces. access-list mac access_list_name Specifies the name of the MAC access list. interface Use this keyword to specify any of the following interfaces: port-channel number Specifies the port-channel number. The range of valid values is 1-63. tengigabitethernet Specifies a valid 10 Gbps Ethernet interface. slot Specifies a valid slot number. port Specifies a valid port number. slot-id number Specifies the slot number of the linecard. Description Use this command to clear statistics on one or on all interfaces. Defaults There are no default configurations for this command. Command Privileged EXEC mode Modes User Guidelines The clear counters all command does not clear counters for any of the protocol daemon stats like LLDP, LACP, MSTP, and so on. For the Dell M8428-k switch, the slot number is always 0 (zero). Example To clear the statistics for 10 Gbps Ethernet interface 0/1: switch#clear counters interface intengigabitethernet 0/1 To clear the statistics for MAC access list named "test": switch#clear counters access-list mac test To clear the statistics for all the interfaces on the linecard in slot 0 (zero): switch#clear counters slot-id 0 Dell Converged Enhanced Ethernet Command Reference 61 53-1002115-01