Dell PowerEdge M520 Dell Converged Enhanced Ethernet Command Reference - Page 215
Internet Group Management Protocol Commands
View all Dell PowerEdge M520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 215 highlights
Chapter Internet Group Management Protocol Commands 12 clear ip igmp group Synopsis Operands Clears information related to learned groups in the IGMP protocol module. clear ip igmp group [A.B.C.D [interface {in | ex}tengigabitethernet slot/port | interface port-channel number | interface vlan vlan_id] | interface {in | ex}tengigabitethernet slot/port | interface port-channel number | interface vlan vlan_id] A.B.C.D Specifies the group address, as a subnet number in dotted decimal format (for example, 10.0.0.1), as the allowable range of addresses included in the multicast group. interface Use this keyword to specify any of the following interfaces: intengigabitethernet Specifies a valid external 10 Gbps Ethernet interface. slot Specifies a valid slot number. port Specifies a valid port number. extengigabitethernet Specifies a valid internal 10 Gbps Ethernet interface. slot Specifies a valid slot number. port Specifies a valid port number. port-channel number Specifies the interface is a port-channel. The range of valid values is 1-63. interface vlan vlan_id Use this keyword to specify any of the following interfaces: Specifies which VLAN interface to display the snooping configuration related information. The range of valid values is 1-3583. Defaults There are no defaults for this command. Command Privileged EXEC mode Modes Description Use this command to clear the group information in the IGMP database, including entries for either a specific group on all interfaces or specific groups on specific interfaces. Usage There are no usage guidelines for this command. Guidelines Examples To clear information for all groups in the IGMP protocol: switch#clear ip igmp group Dell Converged Enhanced Ethernet Command Reference 199 53-1002115-01